Changsha Power Electric Co.,Ltd.
Customers’ satisfaction is our unremitting pursuit.
Add to Cart
Description:
1. Our insulators have externally attached caps and bases. A highly engineered cementing system transfers the load uniformly from the hardware into the porcelain body.
2. Each insulator body is made from the highest quality clay raw materials that have been processed to be fully vitrified porcelain. The body is glazed to add strength to improve surface appearance, and enhance clean-ability.
3. Either chocolate brown or Munsell gray glaze is available. caps and flanges are ferrous, hot dip galvanized. thread holes are proper tapped.
Specifications:
| Model | ZSW-35/4 |  | |
| Creepage Distance(mm) | 1260mm | ||
| Failure load (kN)
| Bending strength | 4 | |
| Trosional strength | 2 | ||
| Main Dimensions (mm)
| H | 500 | |
| φD | 210 | ||
| a1 | 4-M12 | ||
| Φd1 | 76 | ||
| a2 | 4-M12 | ||
| Φd2 | 76 | ||
| Lightning Impulse Withstand Voltage(kV) | 225 | ||
| Power Frequency Wet Withstand Voltage(kV) | 80 | ||
Technical requirements:
1. Glaze: Brown
2. Creepage distance: 1260mm Length: 500mm
3. Weight: 154.0kgs
4. Flange material: Aluminum alloy or stainless steel
4. Package type: Wooden case
Application:
ceramic pillar insulators are used for insulation and support of live parts in outdoor power plants, distribution devices and electrical equipment of power frequency AC substations.
Pre-sales service:
Choose the proper reactor type
Installation recommendations and to provide technical information
Satisfied users of the special design requirements
After-sales service:
Offer professional equipment installation instructing
Provide spare parts for wearing parts(such as post insulator, bolt, etc.)